tinycpuf.v

高速版TINYCPUの本体

`include "defsf.v"

module tinycpuf(clk, reset, run, in, cs, pcout, irout, qtop, pcnext, dbus, out);

 input clk,reset,run;
 input [15:0] in;
 output [1:0] cs;
 output [15:0] irout, qtop, dbus, out;
 output [11:0] pcout, pcnext;
 wire [15:0] qnext, ramout, aluout;
 reg halt, cont, pcinc, jump, push, pop, thru, qthru, dbus2qtop, dbus2ram, dbus2obuf, ir2dbus, qtop2dbus, alu2dbus, ram2dbus, in2dbus;
 reg [11:0] pcout, pcnext;
 reg [15:0] out;

 state state0(.clk(clk),.reset(reset),.run(run),.halt(halt),.cs(cs));
 stack stack0(.clk(clk),.reset(reset),.load(dbus2qtop),.push(push),.pop(pop),.thru(qthru),.d(dbus),.dthru(ramout),.qtop(qtop),.qnext(qnext));
 alu alu0(.a(qtop),.b(qnext),.f(irout[4:0]),.s(aluout));
 dpram #(16,12,4096) dpram0(.clk(clk),.load1(dbus2ram),.load2(0),.addr1(irout[11:0]),.addr2(pcnext),.d1(dbus),.d2(0),.q1(ramout),.q2(irout));

 always @ (pcinc or jump or cs or pcout or irout)
   if(cs == `IDLEB) pcnext = pcout;
   else if(pcinc)  pcnext = pcout + 1;
   else if(jump)  pcnext = irout[11:0];
   else pcnext = 12'hxxx;

 always @ (posedge clk or negedge reset)
   if(!reset) pcout <= 0;
   else if(pcinc || jump) pcout <= pcnext;

 always @ (posedge clk or negedge reset)
   if(!reset) out <= 0;
   else if(dbus2obuf) out <= dbus;

 always @ (posedge clk or negedge reset)
   if(!reset) qthru <= 0;
   else qthru <= thru;

 assign dbus = ir2dbus ? {{4{irout[11]}},irout[11:0]} : 16'hzzzz;
 assign dbus = qtop2dbus ? qtop : 16'hzzzz;
 assign dbus = alu2dbus ? aluout : 16'hzzzz;
 assign dbus = ram2dbus ? ramout : 16'hzzzz;
 assign dbus = in2dbus ? in : 16'hzzzz;

 always @(cs or irout or qtop)
   begin
     halt = 0; pcinc = 0; jump = 0; push = 0; pop = 0; thru = 0; dbus2qtop = 0; dbus2ram = 0; dbus2obuf = 0; ir2dbus = 0; qtop2dbus = 0; alu2dbus = 0; ram2dbus = 0; in2dbus = 0;
   if(cs == `EXEC)
      case(irout[15:12])
      `PUSHI:
          begin
            ir2dbus = 1; dbus2qtop = 1; push = 1; pcinc = 1;
          end	 
      `PUSH: 
         begin
            push = 1; thru = 1; pcinc = 1;
         end
      `POP:
           begin
             qtop2dbus = 1; dbus2ram = 1; pop = 1; pcinc = 1;
           end
      `JMP: jump = 1;
      `JZ:
           begin
             if(qtop == 0) jump = 1;
             else pcinc = 1;
             pop = 1;
           end
      `JNZ: 
           begin
             if(qtop != 0) jump = 1;
             else pcinc = 1;
             pop = 1;
           end
     `IN:
          begin
            in2dbus = 1; dbus2qtop = 1; push = 1; pcinc = 1;
          end
      `OUT:
           begin
             qtop2dbus = 1; dbus2obuf = 1; pop = 1; pcinc = 1;
           end
      `OP:
           begin
             alu2dbus = 1; dbus2qtop = 1; pcinc = 1;
             if(irout[4] == 0) pop = 1;
           end
       default:
         begin
           pcinc = 1; halt = 1;
         end
      endcase
   end

endmodule